Filter
Top Products
26
Using the menus
To open the menus, press the Menu button on the keypad or remote. (The menus
automatically close after 60 seconds if no buttons are pressed.) Use the arrow
buttons to move up and down to highlight the desired menu, then press the Select
button.
To change a menu setting, highlight it, press Se
le
ct, then use the arrow buttons to
adjust the value or select an option or turn the feature on or off. Press Select to
confirm your changes. Use the arrow buttons to navigate to another setting. When
your adjustments are complete, press Menu to access a different menu; press the
Menu button at any time to navigate to the higher-level menu and ultimately close
the menus.
The menus are grouped by usage:
• The Basic Picture menu provides common image
adjustments.
•
The Advanced Picture menu provides more complex image adjustments.
• The Setup menu provides set-up type adjustments that are not
changed often.
• The Status and Service menu provides information about the projector and
source.
Menu navigation
buttons
Basic Picture menu Advanced Picture menu
Setup menu Status and Service menu