Filter
Top Products
28
Advanced Picture menu
BrilliantColor™: Produces an expanded onscreen color spectrum that delivers
enhanced color saturation for bright, true-to-life images. Choose Normal Look for
most video sources and Bright Look for most computer sources.
White Peaking: (video
sources only) Increases
the brightness of whites that are
near 100%.
Color Temperature: C
h
anges the intensity of the colors. Select a listed relative
warmth value.
Force Wide: When this is
off, the analog locking algorithms choose the standard
mode resolution (4:3) as the preferred default resolution. When this is on, the
analog locking algorithms choose wide mode resolution (16:10) as the preferred
default resolution.
Overscan: Removes noise
around the
video image.
Phase: Adjusts the horizontal phase of a computer source.
Sync
Threshold: (progressive signals on
ly) If a hardware device, such as a DVD
player, is not syncing properly with the projector, select this option to help it to sync
when connected to the projector.
Tracking:
Adjusts the vertical scan of a computer source.
Color Space
: This option
applies to computer and component video sources. It
allows you to select a color space that has been specifically tuned for the input
signal. When Auto is selected, the projector automatically determines the standard.
To choose a different setting, turn off Auto, then choose RGB for computer sources
or choose either REC709 or REC601 for component video sources.
Noise Reduction:Reduces temporal and/or
spatial noise in the image.
Flesh Tone Correction: Cont
rols the amount of flesh tone correction applied to the
image.
Set Black Level...: Analyzes
the curren
t input image and calculates an offset value
which is then added to the analog to digital converter black level value. This
ensures optimum black level for each analog source.
Detect Film: Controls film mode detection, and determines whether the original
source of the input video was film or video.
3D Control: allows you to enjoy 3D (stereoscopic) content. Your projector supp
orts
two synchronization modes (External Sync and DLP Link™)
for controlling LCD
shutter glasses. In addition to the projector,
you will need a pair of 3D shutter
glasses, 3D content, and 3D c
ompatible source (and emitter). Ensure the glasses
you choose are consistent with the synchronization mode you will be using.
3D Sync In
vert: (Only applies when 3D
control is set to DLP Link™.) If the image
appears to flutter, look odd or if the image depth looks off
or you experience eye
strain, turn this feature on to see if the image improves.
Gamma: Sel
e
ct the appropriate gamma from among Video, Film, Bright, and CRT.
Color Gamut: Sets the color gamut
of the input signal.
Color Gain Settings: Adjusts the gain of the red, green,
or blue channel of the
image.
Color Offset Settings: Adjusts
the offset of the red, green, or blue channel of the
image.
Horizontal/Vertical Position: Adju
sts the position of a computer source.
.
Advanced Picture menu