Filter
Top Products
29
Setup menu
Language: Allows you to select a language for the onscreen display.
Network: Allows you to setup network settings. See page 33 for details on network
configuration and operation.
• DHC
P: Turns the DHCP on or off.
• IP Address: Assign Network IP Address.
• Sub
net Mask: Assign Network Subnet Mask.
• Default Gateway: Assign
Network Default Gateway.
• WINS Host Name Lookup: Turns WINS Host Name Lookup on or off.
• Host Name: Sh
ows the host name.
• MAC Add
ress: Shows network MAC Address value.
• Show Network Messages: Turns network messages on or off. Network mes-
sages display the projector’s IP address (and host name if enabled) when the
projector is also displaying source messages.
• Restart Network…: Restarts the network.
• Network Fact
ory Reset…: Performs factory reset.
Key Click: T
urns the key click sound on or off. When this setting is on, pressing
keys on the keypad causes the projector’s speaker to play a “click” sound.
Custom Key: Al
lows you to assign a different function to the Custom button,
allowing you to quickly and easily use the effect. Highlight an effect and press
Select to choose a different one.
• Source Info: The default action. Shows the Source Info menu.
• Projector Info: Shows the Projector Info menu.
• Aspect Ratio: Se
ts the ratio of image width to image height (see page 13 and
page 27).
• Auto Im
age: Resynchronizes the projector to the source (page 24).
• Ove
rscan: Removes noise around the image.
• Blank Scr
een: Displays an empty screen.
• Freeze Screen: Pauses the projected image.
• Mute: T
urns off all sound.
• AV
Mute: Enables or disables AV Mute function.
• Sour
ce: Cycles through available sources.
• Closed Captions: Enables or disables Closed Captions.
Blank Key:
Select what to display when the blank key on the remote is depressed:
your custom snapshot, a solid color screen (blue, black or white), the factory logo
screen, a timer, or test patterns. The timer option is useful for classroom tests or
break times during meetings.
Source Keys: Enables or disab
les Source Keys on the optional Commander-2
remote.
AC Power On:
When this feature is on, the projector automatically turns on when
electrical power is connected. This allows control of ceiling mounted projectors
with a wall power switch.
Auto Off Time: Automatically turns the projector off after no signals are detected
for a preset number of minutes. If an active signal is received before the projector
powers down, the image will be displayed.
Screen Save Time: Automatically blanks the screen with a black color after no
signals are detected for a preset number of minutes. The image returns when an
active source is detected or a remote or keypad button is pressed.
Sleep Timer: Al
lows the projector to automatically power off after it has been on
for a specified amount of time.
Always-On Functions:
Allows you to control which projector functions will work
even when the projector is in standby (powered off but connected to AC Power).
Press Up or Down to highlight the function you want to change, then press select or
left and right to change the function to either Yes or No. Press menu when done.
Note that some functions must always have the same value; in this case when you
change one value, other values in the submenu may also change automatically.
Functions which can be adjusted include: Network, DisplayLink, 5-Volt DC Output
and Monitor Out.
Lamp Low Power:
Toggles between on and off. Turn it on to lower the light output
of the lamp. This also lowers the fan speed, making the projector quieter.
Power Sounds:
Controls whether the projector makes a sound when powered on
and off.
Internal Speakers:
Allows the user to turn on and off the internal speakers.