Filter
Top Products
31
PIN Protect: The PIN (personal identification number) feature allows you to
password protect your projector. Once you enable the PIN feature, you must enter
the PIN before you can project an image. The default PIN on this projector is
Menu-Up-Down-Select-Source. Use the navigation buttons on the remote or
keypad to enter the correct 5-button press sequence. When all 5 numbers are entered
correctly, press the Select button on the remote or keypad to select OK. If the
message “Wrong PIN” appears, verify the code and re-enter it. If you mis-enter a
number, you must enter 5 numbers and press the Select button in order to access the
“Wrong PIN” message and re-enter the code.
To enter the PIN at projector startup:
Power up the projector. The “Enter PIN” d
i
alog box appears after the startup screen.
Enter the PIN. Use the navigation buttons on the remote or keypad to enter the
correct button press sequence. See the description above for instructions.
To change the PIN:
Select “Change PIN...” in the Setup menu.
Enter the existing PIN. Enter the new
PIN. You can navigate between OK and Cancel by pressing the arrow buttons on
the keypad. Select OK or Cancel by pressing the Select button. Verify the new PIN.
If you lose or forget your custom PIN:
Contact InFocus support at www.infocus.com/support.
Serial Port, Baud Rate: Sele
cts the serial port and baud rate.
Serial Port Echo: Co
ntrols whether the serial port echoes characters.
Setup menu