Filter
Top Products
8
Setting up the Projector
F
IGURE
7
Connecting the projector to a video player using an S-video cable and the audio con-
nectors on the standard A/V cable
NOTE: The projector does not
have internal speakers, so you
must attach external speakers for
audio.
4 Plug the A/V cable’s white connector into the left “audio out”
port on your video player. Plug the cable’s red connector into
the right “audio out” port on the video player (Figure 6 and
Figure 7).
•
If you’re using an S-video cable, the yellow connectors on
the A/V cable remain unused (Figure 7).
5 Plug the A/V cable’s other white and red connectors to the
left and right “audio in” ports on the projector.
NOTE: You can connect 2
separate video sources (S-video
and composite) and toggle
between them.
6 Attach external speakers (see the following page).
The projector is compatible with these major broadcast video
standards: NTSC, PAL, PAL-M, and PAL-N. It automatically
adjusts to optimize its performance for the incoming video. The
input signals for PAL-M and PAL-N video cannot be automati-
cally detected, therefore they must be chosen manually; see
“Video Standard” on page 27.
CAUTION: Your video player
may also have a “Video Out” port
for a coaxial cable connection.
DO NOT use this to connect to the
projector.
A/V cable
S-video cable