Filter
Top Products
22
Using the Projector
Color
The color setting adjusts a video image from black and white to
fully saturated color.
•
Press the left mouse button to decrease the amount of color in
the image.
•
Press the right mouse button to increase the amount of color in
the image.
Chroma Detail
This setting adjusts the transition between color edges.
•
Press the left mouse button to decrease the detail, smoothing
out the color transition.
•
Press the right mouse button to increase the detail, sharpening
the color transition.
NOTE: The Chroma and Luma
Detail options provide direct
control of the Faroudja Picture Plus
Technology capabilities.
Luma Detail
This setting adjusts the transition between brightness edges,
(similar to a sharpness adjustment).
•
Press the left mouse button to decrease the detail, smoothing
out the brightness transition.
•
Press the right mouse button to increase the detail, sharpening
the brightness transition.
Color Temperature
This
setting has 6 preset values you can select which adjusts the
blue to red balance in the projected image. Click either mouse
button to select the desired color temperature.
Blank Screen
Blank Screen determines what color is displayed when there is no
active source and when the projector is in standby. Press either
mouse button to toggle between the two options.
Reset All
Click either mouse button to reset all the options in this menu to
their original (factory default) settings.