Filter
Top Products
18
Using the Projector
Standby
When you press
standby
, the display and audio turn off and a
blank screen is displayed for 1 minute. After 1 minute, the lamp
goes out if you haven’t pressed
standby
again. You can change the
amount of time the projector stays in standby mode; see
“Standby Time” on page 27 for details.
•
If you press
standby
again within 1 minute, the projector
returns to normal operations immediately.
•
If you press
standby
again after 1 minute, there is about a
30 second delay before the lamp turns back on.
Video
When you have more than one source (computer and video) con-
nected to the projector, select between them by pressing the but-
ton for the source you want.
Note that the keypad has one video button, the remote has a
Video 1 button and a Video 2 button.
On the keypad, press
video
to display the image from your video
player. Press it again to toggle between a composite video input
and an S-video input.
On the remote, press Video 1 to toggle between a composite
video input and an S-video input. Press Video 2 to toggle
between 4x3 format and 16x9 format.
Volume
•
To increase the volume, press
•
To decrease the volume, press
Volume adjustments are saved for each source.