Filter
Top Products
16
Using the Projector
Using the Remote Control
NOTE: If you can’t aim the
remote control at the projector so
that its signal is received
— for
example, when using rear
projection
— connect it directly to
the projector with the optional
remote control cable. See
“Optional Accessories” on
page 46.
Point the remote control at the projection screen or at the front or
rear of the projector. The range for optimum operation is about
40 feet. If you point the remote at the projection screen, the dis-
tance to the screen and back to the projector must be less than or
equal to 40 feet. For best results, point the remote directly at the
front or the rear of the projector.
The remote has a disk mouse, two mouse buttons, and several
feature buttons. Press anywhere on the edge of the disk mouse to
move the cursor on the screen. You can move the cursor at any
angle by pressing the corresponding edge of the disk.
Using the Remote and Keypad Buttons
This section provides a reference to the keypad and remote but-
tons.
F
IGURE
13
Remote