Filter
Top Products
37
Solutions to Common Problems
Problem: Nothing on projection screen
•
Make sure that the power cord is properly connected to a func-
tional AC electrical outlet. Make sure that the power cord is
also properly connected to the projector.
•
If the projector is plugged into a power strip, make sure the
power strip is turned on.
•
Make sure you have removed the lens cap from the projection
lens at the front of the projector.
•
Make sure the projector is switched on.
•
Check the projector’s lamp to ensure that it is securely con-
nected in the lamp module. See “Replacing the Projection
Lamp” on page 33.
Problem: Image not being projected
•
You might need to adjust the brightness or contrast until the
image is visible. See page 21.
•
Verify that the appropriate input source is selected. See “Com-
puter” on page 17 or “Video” on page 18.
Problem: Image from VCR does not display properly.
•
Make sure “DVD Optimized” is turned off in the Image menu.
See page 25.
•
Adjust your VCRs sharpness control, if available.
•
Adjust the projector’s contrast control to perfect the image.
Problem: Image from source using S-video does not display.
•
Press the Video 1 button on the remote to toggle between com-
posite video and S-video. See page 18.
Problem: PAL video does not display correctly.
•
Select PAL from the Video Standard options in the Controls
menu. See “Video Standard” on page 27.
Problem: Image has noise on the edges.
•
Turn on Overscan in the Image menu. See page 25.