Filter
Top Products
©2001 Inova Computers GmbHPage A-4 CPU Appendix-A
IPB-FPE8
Appendix A
J10A
J9A
J10B
J9B
J18B
J18A
J11
Figure A1.4 Piggyback Interface IPB-FPE8MS
Note that the IPB-FPE8 module does not allow a HD to be connected behind it and the lower 9-
pin D-Sub slot may be used for remote connection of PanelLink for example. The IPB-FPE8MS
shown in figure A1.4 enables connection of floppy, a CD-ROM and other peripherals. The connector
names and descriptions are declared in table A1.4.
Table A1.4 IPB-FPE8MS Connector Description
A1.4 IPB-FPE8MS (Theme Variation)
Figure A1.4 illustrates the construction of the IPB-FPE8MS - a variation of the IPB-FPE8 but with a
number of extra features. The electrical connection to the CPU base board is still via the underside
connector J11 and again, the precautions mentioned for the IPB-FPE8 are valid here.
Connector Description
J9A, J10A IDE Primary (Master or Slave)
J9B, J10B IDE Primary (Master or Slave)*
J11 Mouse, Keyboard and COM1
J18A, J18B Floppy Disk (either a standard slim-line floppy connector or flex cable)
* If connectors 9a and 10a are configured as Master then 9b and 10b must be Slave.