Filter
Top Products
AP440FX Motherboard Technical Product Specification
56
3.14.4.11 Typematic Rate Delay
Sets how long it takes (in milliseconds) for the key-repeat function to start when you hold down a
key on the keyboard. The options are:
• 250 msec (default)
• 500 msec
• 750 msec
• 1000 msec
If Typematic Rate Programming is set to Default, this option is not visible.
3.14.4.12 Typematic Rate
Sets the speed (in characters per second) at which characters repeat when you hold down a key on
the keyboard. The higher the number, the faster the characters repeat. The options are:
• • 6 char/sec (default)
• 8 char/sec
• 10 char/sec
• 12 char/sec
• 15 char/sec
• 20 char/sec
• 24 char/sec
• 30 char/sec
If Typematic Rate Programming is set to Default, this option is not visible.
3.14.4.13 Scan User Flash Area
Scans the user Flash area for ROMs. The options are:
• Disabled
• Enabled (default)
3.14.4.14 Quick Mode
Enables the user to speed up the boot process. The options are:
• Disabled (default)
• Enabled
3.14.5 Advanced Screen
This section describes the Setup options found on the Advanced menu screen. If you select certain
options from the Advanced screen (e.g., Peripheral Configuration), the Setup program switches to a
subscreen for the selected option. Subscreens are described in the sections following the
description of the Advanced screen options.
3.14.5.1 Processor Type
Reports the microprocessor type. There are no options.