Filter
Top Products
SQ599
15
Primary Master/Primary Slave/Secondary Master/Secondary Slave
The categories identify the types of 2 channels that have been installed in the computer.
There are 45 predefined types and 4 user definable types are for Enhanced IDE BIOS.
Type 1 to Type 45 are predefined. Type User is user-definable.
Press PgUp/<+> or PgDn/<−> to select a numbered hard disk type or type the number and
press <Enter>. Note that the specifications of your drive must match with the drive
table. The hard disk will not work properly if you enter improper information for this
category. If your hard disk drive type does not match or list, you can use Type User to
define your own drive type manually.
If you select Type User, related information is asked to be entered to the following items.
Enter the information directly from the keyboard and press <Enter>. This information
should provide in the documentation from your hard disk vendor or the system
manufacturer.
If the controller of HDD interface is ESDI, the selection shall be “Type 1”.
If the controller of HDD interface is SCSI, the selection shall be “None”.
If the controller of HDD interface is CD-ROM, the selection shall be “None”.
CYLS. number of cylinders
HEADS number of heads
PRECOMP write precom
LANDZONE landing zone
SECTORS number of sectors
MODE HDD access mode
If a hard disk has not been installed select NONE and press <Enter>.
Drive A type/Drive B type
The category identifies the types of floppy disk drive A or drive B that have been installed
in the computer.
None No floppy drive installed
360K, 5.25 in 5-1/4 inch PC-type standard drive; 360 kilobyte capacity
1.2M, 5.25 in 5-1/4 inch AT-type high-density drive; 1.2 megabyte capacity
720K, 3.5 in 3-1/2 inch double-sided drive; 720 kilobyte capacity
1.44M, 3.5 in 3-1/2 inch double-sided drive; 1.44 megabyte capacity