Filter
Top Products
SQ599
50
2. From the "Setup PCAD Config File" screen, keyin the drive letter of the hard
disk where PCAD software resides.
3. From the "Setup PCAD Config File" screen, keyin the directory where the
PCAD drivers reside.
4. From the "Setup PCAD Config File" menu, choose from
800x600 16 Colors
1024x768 16 Colors
1280x1024 16 Colors
5. After the message
"Are you sure (Y/N) ?"
appears on the screen, keyin
'Y' <Enter>
6. After setup completes, exit INSTDRV.EXE program.
7. Restart your PCAD program.
5-3-7 VersaCAD/386 2.1
Driver Files
1. The enclosed SiS 6205 VersaCAD/386 drivers (packed files) are
(1) VCAD.1
(2) VCAD.E
2. Being unpacked, the SiS 6205 VersaCAD/386 driver "VSIS.EXE" supports
640x480 16 Colors
800x600 16 Colors
1024x768 16 Colors
1280x1024 16 Colors
3. This driver is a TSR (Terminate and Stay Resident) type program.
You just need to execute once each time your computer is powered up.
For this reason, it is recommended that this driver should be placed in your
"AUTOEXEC.BAT" file.
4. Use "INSTDRV.EXE" to
(1) unpack and copy driver VSIS.EXE
(2) unpack and copy configure file VSIS.CFG
to where they should resides
VersaCAD/386 Setup
1. Change the current "drive:\directory" path to where VersaCAD/386 resides.
2. Run this driver VSIS.EXE.