Filter
Top Products
SQ599
31
SLOT2
PCI-
SLOT3
ISA
determine the location of the PCI
IDE device
(See below item)
PCI-SLOT1
PCI-SLOT2
PCI-SLOT3
− assign IRQ 14 for primary IDE INT#
IRQ 15 for secondary IDE INT#
for the specified slot
ISA
− The BIOS will not assign any IRQs
even if PCI IDE card is found!
Because some IDE cards connect the
IRQ 14 & 15 directly from ISA slot
thru a cord. (This cord is called Legacy
Header)
F. Primary IDE INT#
Secondary IDE INT#
A
B
To tell which INT3 does the PCI IDE card
is using for its interrupts
Remarks: Master Arbitration Protocol, CPU->PCI Mem Post Write Buf, CPU->PCI
Memory Burst Write, and PCI Master Burst Read/Write please see the
reference: Chipset Data Sheet.
4-9 Password Setting
When you select this function, the following message will appear at the center of the
screen to assist you in creating a password.
ENTER PASSWORD:
Type the password, up to eight characters, and press <Enter>. The password typed now
will clear any previously entered password from CMOS memory. You will be asked to
confirm the password. Type the password again and press <Enter>. You may also press
<Esc> to abort the selection and not enter a password.