Filter
Top Products
SQ599
43
Driver Files
The OS/2 3.0 driver files resides on the "SiS 6205 Driver Diskette Sub-directory
OS2WARP (i.e. \OS2WARP)". The enclosed SiS 6205 OS/2 3.0 driver contains the
following files:
SISINST.CMD SiS driver install program
SVGA.EXE SiS PMI Generator
S768256.DL@ SiS IBMDEV32.DLL Display Driver
OTHERS other files required during installation
OS/2 Setup
1. Install your OS/2 system using "VGA display" option (i.e. standard VGA).
Then start your OS/2 system.
2. Enter "OS/2 window" or "OS/2 full screen".
3. Insert "SiS 6205 Driver" diskette, enty to OS/2 3.0 display driver directory and
type
SISINST [drive] <Enter>, (where [drive] is the boot drive character).
For example,
A:\OS2WARP>SISINST C
(suppose drive C is the boot drive)
4. All the Driver Files will be copied to a subdirectory C:\SISDRV.
5. The "Display Driver Install" menu appears. Choose the "Primary Display
Adapter" option. Click "OK".
6. The "Primary Display Adapter Type" menu appears. "SiS 6205 Super VGA
Driver" is shown in the box. Click "OK" to continue.
7. The "Display Driver Install" menu appears again. Click "OK" to continue.
8. The "Select Display Resolution" menu appears. The following display drivers
shown in the box:
640x480 256 colors driver (default resolution)
Choose this display driver.
9. The "Source Directory" menu is shown on screen. Specify the "drive:\directory"
holds the SiS 6205 OS/2 3.0 display drivers. (You can choose either
A:\OS2WARP or C:\SISDRV in this case) The program would install the selected
display driver for you.
10.When the display driver installation is completed, shut down the system and
restart your OS/2 3.0.
11. SiS 6205 supports the following resolutions:
640x480 256-colors
800x600 256-colors