Filter
Top Products
SQ599
28
(*) Remark 1 mode
2. 10 Sec
20 Sec
30 Sec
40 Sec
1 Min
3 Min
5 Min
10 Min
15 Min
20 Min
30 Min
40 Min
1 Hr
2 Hr
3 Hr
Defines the continuous idle time before
the system entering SUSPEND mode.
if any item defined in (J) is enabled &
active, SUSPEND timer will be reloaded
Note: Normally,SUSPEND
mode puts the system
into low speed or 8
MHz, clock is
stopped, screen may
be off depend on (E)
J. PCI Master Activity
COM Ports Activity
LPT Ports Activity
1. Disable The specified event’s activity will not
affect the PM timers
HDD Ports Activity
DMA Ports Activity
VGA Activity
IRQ3 (COM 2)
IRQ4 (COM 1)
IRQ5 (LPT 2)
IRQ6 (Floppy Disk)
IRQ7 (LPT 1)
IRQ8 (RTC Alarm)
IRQ9 (IRQ2 Redir)
IRQ10 (Reserved)
IRQ11 (Reserved)
IRQ12 (PS/2 Mouse)
IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
2. Enable The specified event’s activity causes the
PM Timers to be reloaded.
i.e. the Power Management Unit(PMU)
monitors the specified activities as PM
events