Filter
Top Products
14 Intel® Server System SR2500AL User’s Guide
SAS/SATA Mid-Planes
The mid-plane serves as the primary interface between the server board, hot-swap
backplane, and control panel. Two midplanes are offered for this system: a passive SATA
(data cables required), and an active SAS/SATA RAID (no data cables required). The
following diagrams show the location for each connector found on the mid-planes.
Figure 8. Passive Mid-Plane Components
Note: SATA connectors 6 and 7 are not used in the Intel
®
Server System SR2500ALLX and/or
the Intel
®
Server System SR2500ALBRP.
AF000047
E
A
J
B
C
F
G
I
H
D
A. Mid-plane Power F. Fan 4 Power
B. Fan 6 Power G. Fan 3 Power
C. Fan 5 Power H. Fan 1 Power
D. SATA 0-7 Connectors I. Fan 2 Power
E. Bridge Board Connector J. Backplane Connectors