Intel SR2500AL Server User Manual


 
54 Intel® Server System SR2500AL User’s Guide
9. See the documentation that came with your tape drive for data cable connection
information.
10. Connect the 4-pin tape power cable to the tape drive.
11. Install the server system cover. For instructions, see “Installing the Server System
Cover”.
12. (Optional) Install the front bezel. For instructions, see “Installing the Front Bezel”.
13. Plug all peripheral devices and the AC power cable(s) into the server.
Installing a Sixth Hard Drive
Use the instructions below to install a hard drive in the sixth hard drive bay.
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information”.
2. Power down the server and unplug all peripheral devices and the AC power
cable(s).
3. Remove the front bezel if it is installed. For instructions, see “Removing the Front
Bezel”.
4. Remove the server system cover. For instructions, see “Removing the System
Cover”.
5. Slide the sixth HDD bracket into the backplane as shown in the figure below.
Figure 47. Installing Sixth HDD Bracket
AF000012