Filter
Top Products
Vig390s Motherboard Manual V1.0
9
Feature Summary
The VIG390S motherboard supports Intel Pentium Xeon™ processors with 1MB of
third-level cache integrated in a micro PGA 604 Socket package operating at speeds
up to 3.6GHz. Single or dual processors are supported but should be identical in
speed and CPU stepping revision.
Table 4: Feature Summary
Form Factor
VIG390S: extended ATX (9.8 inches by 12.0 inches [250.00 millimetres
by 305.00 millimetres])
Processor
- Single or dual Pentium Xeon CPU
- 800MHz FSB
- Integrated 512MB second and 1MB third level cache
- Socket micro PGA 604 connector
604-pin FC-µPGA4
Supported CPU
speeds
CPU Speed FSB L2 Cache L3 Cache
3.2. to 3.6GHz 800MHz 512K 1M
Memory
- Four 204-pin DDR2 SDRAM Dual Inline DIMM sockets.
- Support for up to 8GB of DDR2 400 ECC 72bit
Chipset
- Northbridge Intel® 7525 Memory Controller Hub (GMCH)
- Southbridge Intel® 6300ESB I/O Controller Hub (ICH5)
- 8 Mbit Firmware Hub (FWH)
Video
- PCI-Express connector supporting x1 ,x4, x8 and x16 lane VGA cards
Audio
- Audio subsystem using the ADI AD1980
6 channel audio codec.
I/O Controller
- Southbridge Intel® 6300ESB I/O Controller Hub (ICH5)
USB
- Support for USB 2.0 devices
Peripheral Interfaces
- Eight USB Ports
- One Serial Port
- One Parallel Port
- Two Serial ATA IDE interfaces
- Two Parallel ATA IDE interfaces with UDMA 33, ATA-66/100 support
- One diskette drive interface
- PS/2 keyboard port
- PS/2 mouse port
- One IEEE1394a Port
LAN Support
Gigabit (10/100/1000 Mbits/sec) LAN subsystem using the
Broadcom BMC5751 PCI Express Gigiabit LAN Controller PCI-E 1.0a
interface
BIOS
- AMI BIOS (resident in the 8 Mbit FWH)
- Support for Advanced Configuration and Power Interface (ACPI), Plug
and Play SMBIOS 2.3, WfM2.0,DMA2.0a.
Instantly Available PC
Technology
- Support for PCI Local Bus Specification Revision 2.2
- Suspended to RAM support
- Wake on PCI, RS-232, front panel, PS/2 devices and USB ports
Expansion Capabilities
- One PCI (32bit 5v) bus add-in card connectors
- Two PCI-X (64bit) bus add-in card connector
- One PCI-Express (x16 lane) add-in card connector
- One PCI-Express (x4 lane) add-in card connector
Hardware Monitor
Subsystem
- Hardware monitoring and fan control ASIC
- Voltage sense to detect out of range power supply voltages
- Thermal sense to detect out of range thermal values
- Four chassis fan connectors with activity monitor(two rear and two
front)
- 2 x CPU Heatsink FAN speed activity monitor
- Thermal Fan speed control