Filter
Top Products
142 Intermec EasyCoder PF4i Compact Industrial—User’s Guide (Fingerprint)
Appendix D—Intermec Supplies
Recommended Paper Type Settings (Europe)
Direct Thermal Printing; 8 dots/mm (203.2 dpi)
Type/Speed Name Label Label Max Rec. Print Speed
1
Constant Factor Dir 1&3
2
Dir 2&4
3
Top Coated/ Thermal Top Board
4
105 40 100 100
Standard Thermal Top 100 40 200 150
Non Top Coated/ Thermal Eco 95 40 200 150
Standard Thermal Eco Board
4
85 40 200 150
Top Coated/High Thermal Top High Speed 90 40 200 200
Thermal Transfer Printing; 8 dots/mm (203.2 dpi)
Type/Speed Name Ribbon Ribbon Label Max Rec. Print Speed
1
Constant Factor Offset Dir 1&3
2
Dir 2&4
3
GP02 TTR Uncoated 75 25 0 150 150
TTR Coated 80 25 0 150 150
TTR Premium 70 25 0 200 200
HP66 TTR Coated 100 25 0 200 200
TTR Premium 80 25 0 200 200
TTR Premium Board
4
105 25 0 150 150
TTR High Gloss White 95 25 0 200 200
TTR Polyethylene 75 25 0 200 150
TTR Gloss Polyethylene 90 25 0 200 200
HP07 TTR Coated 100 25 0 200 200
TTR Premium 90 25 0 200 200
TTR Premium Board
4
105 25 0 150 150
TTR Polyethylene 85 25 0 200 200
TTR Gloss Polyethylene 95 25 0 200 150
HP05 TTR Coated 100 25 0 200 200
TTR Premium 80 25 0 200 200
TTR Premium Board
4
95 25 0 200 200
TTR High Gloss White 80 25 0 200 200
TTR Polyethylene 75 25 0 200 150
TTR Gloss Polyethylene 80 25 0 200 200
HR03 TTR High Gloss Polyester 100 30 0 200 200
1
/. Exceeding the recommended print speed may cause the printhead to wear out prema-
turely. If the ambient temperature is lower than +15°C (+59°F), decrease print speed by
50 mm/sec.
2
/. Applies to printing of text, lines, boxes, images, and picket fence bar codes.
3
/. Applies to ladder bar codes.
4
/. Requires high printhead pressure (see Chapter 12 “Adjustments, Printhead Pressure”).