Filter
Top Products
FEED
DIRECTION
Dot #0
Dot-line
on printhead
X-start Width (1-832)
Origin
Length
Dot #831
10.3 mm (0.41 in)
PRINT
PRINT
WINDOW
WINDOW
PRINT
WINDOW
max. 104.0 mm (4.095 in)
25-114.3 mm (1-4.5 in)
Intermec EasyCoder PF4i Compact Industrial—User’s Guide (Fingerprint) 55
Chapter 6—Setting Up the Printer
• The length setup creates an emergency stop, which works when the
printer is set up for “Label (w gaps)”, “Ticket (w mark)”, or “Ticket
(w gaps).” If the label stop sensor (LSS) has not detected a gap or
mark within 150% of the set length, the media feed is automatically
stopped to avoid feeding out a whole roll of media, because of an LSS
malfunction.
By setting up the X-start, the Width, and the Length, you will create a
print window inside which the printing can be performed. Any object or
fi eld extending outside the print window in any direction will either be
clipped or cause an error condition (Error 1003 “Field out of label”), see
Intermec Fingerprint v8.xx, Programmer’s Reference Manual.
Print Window (8 dots/mm standard printhead)
Intermec offers a number of non-standard thermal printheads, see Chap-
ter 8.