Filter
Top Products
Appendix and TroubleShooting
The Wireless-G USB 2.0 Flex Adaptor Does
Not Work Properly
If this happens, follow the guidelines below.
Right-click the My Computer desktop icon
and choose Properties to open the System
Properties dialog box.
Click the Hardware tab and then choose the
Device Manager button.
In the opened window, find your Wireless-G
USB Adapter to see if the installation is
successful. If you see a yellow exclamation
mark beside the item, please go along with
the steps below to reinstall the drivers.
Uninstall the software and hardware drivers
from your PC. (Please refer to the previous
topic for details)
Restart your computer and repeat the
installation procedures as indicated in this
chapter in this manual: Installation of the
Wireless-G USB 2.0 Flex Adaptor.
When finished, open the Device Manager
window again to verify if the installation is
approved. The yellow exclamation mark shall
be removed for this time.
1.
2.
3.
4.
5.
6.
47