Filter
Top Products
3
WELCOME
Thank you for purchasing a SLIDES 2 PC film and slide scanner. Please take a moment to read through this
manual in order to get the most out of your SLIDES 2 PC.
PRECAUTIONS
Before using SLIDES 2 PC, please ensure that you read and understand the safety precautions described
below. Always ensure that the SLIDES 2 PC is operated correctly:
Never operate SLIDES 2 PC inside of an aircraft or anywhere else where operation of such devices is
restricted. Improper use creates the risk of serious accident.
Do not try to open the case of SLIDES 2 PC or attempt to modify SLIDES 2 PC in any way. High-
voltage internal components create the risk of electric shock when exposed. Maintenance and repairs
should be performed only by authorized service providers.
Keep SLIDES 2 PC away from water and other liquids. Do not use SLIDES 2 PC with wet hands. Never
use SLIDES 2 PC in the rain or snow. Moisture creates the danger of fire and electric shock.
Keep SLIDES 2 PC and its accessories out of the reach of children and animals to prevent accidents or
damage to the image copier.
If you notice smoke or a strange odor coming from SLIDES 2 PC, turn the power off immediately. Take
SLIDES 2 PC to the nearest authorized service center for repair. Never attempt to repair SLIDES 2 PC
on your own.
Use only the recommended power accessories. Use of power sources not expressly recommended for
SLIDES 2 PC may lead to overheating, distortion of the equipment, fire, electrical shock or other
hazards.
SLIDES 2 PC may become slightly warm during use. This does not indicate malfunction.
If the exterior of SLIDES 2 PC needs cleaning, wipe it with a soft, dry cloth.
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy. If not installed and used in accordance with the instruction, it may cause harmful interference to radio
communication. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment on the off, the user is encouraged to try to correct the interference by one or more the
following suggestion:
Reorient or relocate the receiving antenna.
Increase the distance between the equipment and the receiver.
Connect the equipment to a different power outlet other than the one where the receiver is connected.
Consult an experienced television or radio technician for help.
CAUTION: To comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules, this device must only be installed on computer equipment certified to comply with the
Class B limits.