Filter
Top Products
Press the STAT key.
To input data or to make changes to an existing set of data values use the Edit function. (number
one under the EDIT list).
Press the number 1 key.
If your stat list editor does not show the columns labeled L1, L2, and L3 you can set up the
Editor by selecting SetUpEditor on the previous screen.
Press the STAT key.
Press the 5 key.
Press the ENTER key.
If you set up the editor then return to the Edit function. Go ahead and type the ten weights in
under the column labeled L1. Press the ENTER key when you are done with one number and
ready to move on to the next number.
Type in 131 and press the ENTER key.
Type in 114 and press the ENTER key.
Type in 167 and press the ENTER key.
…continue until all the data values have been entered.
6