JVC DT-V1710CG Computer Monitor User Manual


 
9
ENGLISH
SDI INPUT CARD (IF-C21SDG/IF-C51SDG)
Compliant with EMBEDDED AUDIO and AUTO INPUT (the SDI input
card IF-C51SDG is equipped with an AUDIO LEVEL METER function)
SWITCHED OUT terminal
Output (OUT) terminal for the re-locked signal.
The currently selected input signal is output from this terminal.
NOTES:
When the input signal is switched from the SDI input card, the SWITCHED OUT
terminal still outputs the input signal which is selected last from among the inputs on
this input card.
No signal is output from the SWITCHED OUT terminal when the monitor is turned
off or in the stand-by mode.
D1 SDI and EMBEDDED AUDIO signal input terminal
Output terminal for the D1 SDI signal (D1 component serial digital signal) in
compliance with SMPTE259M.
This card is also compatible with the EMBEDDED AUDIO signals with a
48 kHz sampling frequency and channel range of 1 to 8 channels.
The EMBEDDED AUDIO channel is controlled from this monitor.
Refer to EMBEDDED AUDIO channel switch button on page 4.
Select IN 1 input: press INPUT SELECT A (SLOT1)/C (SLOT2)/E (SLOT3) buttons.
Select IN 2 input: press INPUT SELECT B (SLOT1)/D (SLOT2)/F (SLOT3) buttons.
Audio output terminal
Output terminal for EMBEDDED AUDIO signals that are decoded into
analogue signals.
This terminal outputs the same input and same channel as the audio monitored
with the speakers.
NOTES:
When the input from other input card is being monitored, the input audio signal
selected last from among the inputs on this card and the audio channel which is
selected at that time are output.
No signal is output from the audio output terminal when the monitor is turned off or
in the stand-by mode.
Connection terminal
Attach to the connection terminal in the slot for your Multi-Format Monitor.
NOTES:
Do not touch the dip switches near the connection terminal.
1
Compatible signal formats:
480/60i, 576/50i, EMBEDDED AUDIO
2
3
4
IN1
IN2
MONITOR
OUT
AUDIO
SWITCHED
OUT
E.AUDIO
SDI
1
2
3
4
Refer to AUTO INPUT on page 19 for the AUTO INPUT function.
Refer to STATUS DISPLAY on page 22 for the EMBEDDED AUDIO LEVEL
METER function. (IF-C51SDG only)
LCT1423-001A_p2-17 4/29/03, 5:03 PM9