JVC GD-V4200PCE Computer Monitor User Manual


 
13
ENGLISH
Changing the Aspect Ratio
Precautions for using the screen mode switching function
This Monitor features a screen mode switching (aspect ratio
change) function. If you select a mode different in aspect
ratio from software such as TV programs, the picture may
look different from original picture. Be aware of this point
when you are selecting a screen mode.
If you select a wide screen mode while viewing
conventional video programs of the aspect ratio 4:3, some
portions (edges) of the original picture will be cut off, or
deformed. To enjoy the original picture as it is, select
“REGULAR” while viewing such programs.
If you place the Monitor in a tea room, hotel, etc. for
business purposes or public viewing and modify the picture
by using the screen mode switching (aspect ratio change)
function, this could violate the copyright protected by the
copyright law, which requires your special attention.
If you make the screen very bright and watch programs
selecting “REGULAR” for a long period of time, the
Monitor screen may happen to be burned in. If this occurs,
watching programs using a wide screen mode for a while
will reduce the burn-in gradually.
With this Monitor, you can select among three types of wide
screens (FULL, ZOOM, and PANORAMIC) in addition to the
REGULAR screen of conventional 4:3 aspect ratio.
Press ASPECT to select the screen size
Each time you press the button, the screen size changes as
follows:
REGULAR: Displays at conventional 4:3 aspect ratio.
FULL: REGULAR size display is enlarged
horizontally.
ZOOM: REGULAR size display is enlarged
vertically and horizontally at the same ratio.
PANORAMIC: REGULAR size display is enlarged
horizontally to the extent that the picture
does not look abnormally.
Notes:
When one of the following signals is being input, the aspect
ratio is fixed and cannot be changed.
Aspect ratio is fixed to FULL: When 1080i or 720p signal
comes in (through the COMPONENT input terminals)
When 480p signal (through the COMPONENT input
terminals) and any signal comes in (through the RGB input
terminals), you can select only REGULAR and FULL.
The aspect ratio can also be changed on the Function
Selection Menu (page 18).
DISPLAY ASPECT POWER
RGB
COMPO.
VIDEO B
VOLUME
MULTIPLE
MODE ID SET
MONITOR ADJUSTMENT
VIDEO A
MUTING
MENU/EXIT
RM-C575 REMOTE CONTROL UNIT
ID
ASPECT
REGULAR FULL
ZOOMPANORAMIC
12-19.GD-V4200PZW-A[EN]/f 00.2.23, 5:21 PM13