Filter
Top Products
27
ENGLISH
SIZE/POSITION ADJ.* : See page 14.
H.SIZE* Adjusts the horizontal screen size.
H. POSITION* Adjusts the horizontal screen position.
V. SIZE* Adjusts the vertical screen size.
V.POSITION* Adjusts the vertical screen position.
CLOCK PHASE* Adjusts to eliminate stripes or flickering.
Normally, no adjustment is needed.
sub menu Displays the fine adjustment bar.
reset Resets Size/position Adjustment Menu settings to defaults.
PICTURE ADJ. (Picture adjustment): See page 15.
CONTRAST Adjusts the contrast of the picture.
BRIGHT Adjusts the brightness of the picture.
CHROMA** Adjusts the color density of the picture.
PHASE*** Adjusts the color phase.
SHARPNESS Adjusts the outlines of the picture.
sub menu Displays the fine adjustment bar.
reset Resets the Picture Adjustment Menu settings to defaults.
FUNCTION SELECT: See pages 16 to 19.
COLOR TEMP. Adjusts the color temperature.
Use when the picture is reddish or bluish.
ASPECT Selects the horizontal to vertical ratio of the screen.
SIGNAL MODE • Selects a color system (NTSC, PAL, SECAM) when VIDEO A or VIDEO B input is selected.
• Selects a scan system (480i, 576i, 480p, 720p, 1080i) when COMPONENT input is selected.
Normally, set to “AUTO.”
reset Resets the Function Selection Menu settings to defaults.
* Adjustment is only possible when RGB input is selected.
** Adjustment is not possible when RGB input is selected.
*** Adjustment is only possible when viewing NTSC signal through the VIDEO A or B terminal.
Setup Menu
POWER SAVE Sets the length of time before standby mode is automatically assumed after the input signal has
stopped being supplied. (See page 21.)
CONTROL LOCK Sets the Monitor so that it cannot be operated with the buttons on itself. (See page 21.)
STATUS DISPLAY Sets if you want the input terminal and the type of signal to be indicated on the screen just after
inputs are switched. (See page 22.)
SCREEN SAVER Sets a screen saver. (See page 23.)
WHITE BACK Use to eliminate afterimages on the screen. (See page 22.)
VENTILATION MODE Adjusts the cooling fan speed according to the Monitor mounting method. (See page 23.)
WHITE BALANCE Adjusts R GAIN, G GAIN and B GAIN finely each for “HIGH” and “LOW” settings of the color
temperature. (See page 17.)
all reset Resets the Setup Menu settings to defaults. (See page 23.)
HOUR METER Use to confirm the hours of use. (See page 21.)
G GAIN
B GAIN
R GAIN
sub menu
reset
ADJUST:
WHITE BALANCE:HIGH
SELECT:
EXIT:
MENU
: 000
: 001
: 002
Setup Menu
White Balance Adjustment Menu
: 000
G GAIN
:+001
B GAIN
:–002
R GAIN
+
–
+
–
+
–
Are you sure?
"YES" then press key.
"NO" then press key
MENU
Are you sure?
"YES" then press key.
"NO" then press key
MENU
+
–
reset
all reset
POWER SAVE
CONTROL LOCK
STATUS DISPLAY
SCREEN SAVER
WHITE BACK
VENTILATION MODE
WHITE BALANCE
all reset
HOUR METER x100h
SET-UP MENU
ADJUST:
SELECT:
EXIT:
MENU
: 1MIN.
: ON
: ON
: ON
: ON
: H
: 001
24-32.GD-V4200PZW-A[EN]/f 00.2.23, 5:19 PM27