Filter
Top Products
19
ENGLISH
Setting the Receivable Signal Types
You can set the receivable signal types. Normally, select
“AUTO.”
A common setting will apply to both VIDEO A and B
terminals, and a different setting will apply to the
COMPONENT terminal.
1
Press MENU/EXIT (or MENU on the
Monitor) to display the Main Menu.
2
Press 5/∞ to move the cursor (3) to
“FUNCTION SELECT.”
3
Press 3 to display the Function
Selection Menu.
4
Press 5/∞ to move the cursor (3) to
“SIGNAL MODE.”
5
Press 2/3 to select the receivable video
signal type.
Each time you press the button, the receivable video
signal type changes as follows:
•
When VIDEO A or VIDEO B input is selected:
•
When COMPONENT input is selected:
6
Press MENU/EXIT (or MENU on the
Monitor) twice to exit the menu
operations.
To reset the setting
You can only reset the color temperature (see page 16), aspect
ratio (see page 18), and video signal type at the same time.
See “Resetting the Function Selection Menu Settings”
described in the right column.
SIZE/POSITION ADJ.
PICTURE ADJ.
FUNCTION SELECT
STATUS DISPLAY
ENTER:
MAIN MENU
SELECT:
EXIT:
MENU
This item
appears only
when the
“RGB” input is
selected.
Cursor (3)
Resetting the Function Selection Menu Settings
You can reset all the following Function Selection Menu
settings at a time.
• Colour Temperature (see page 16)
• Aspect Ratio (see page 18)
• Receivable Signal Types:
SIGNAL MODE (see the left column)
1
Press MENU/EXIT (or MENU on the
Monitor) to display the Main Menu.
2
Press 5/∞ to move the cursor (3) to
“FUNCTION SELECT.”
3
Press 3 to display the Function
Selection Menu.
4
Press 5/∞ to move the cursor (3) to
“reset.”
5
Press 3.
The confirmation screen appears.
6
Press 3 again to reset the adjustments.
To cancel the reset, press MENU/EXIT (or MENU on
the Monitor).
AUTO NTSC
PALSECAM
AUTO 480i 576i
480p720p
1080i
COLOR TEMP.
ASPECT
SIGNAL MODE
reset
FUNCTION SELECT
ADJUST:
SELECT:
EXIT:
MENU
: HIGH
: PANORAMA
: AUTO
*
SIZE/POSITION ADJ.
PICTURE ADJ.
FUNCTION SELECT
STATUS DISPLAY
ENTER:
MAIN MENU
SELECT:
EXIT:
MENU
This item
appears only
when the
“RGB” input is
selected.
Cursor (3)
COLOR TEMP.
ASPECT
SIGNAL MODE
reset
FUNCTION SELECT
ADJUST:
SELECT:
EXIT:
MENU
: HIGH
: PANORAMA
: AUTO
*
Are you sure?
"YES" then press key.
"NO" then press key
MENU
reset
12-19.GD-V4200PZW-A[EN]/f 00.2.23, 5:21 PM19