Filter
Top Products
EN 19
5
PRESS MEMORY WHEN THE DE-
SIRED IMAGE APPEARS
•The image is stored in memory and appears
on the screen.
•If MEMORY display is unstable, press FRAME
STABILISER button to call up “F.STABILISER”
on TV screen to stabilize the frame.
6
PRESS PRINT
•Print Lamp blinks, indicating that printing
has started.
•“Now printing!!” appears on screen during
printing.
•When the printed sheets are delivered to the
output tray and “Now printing!!” disappears,
printing is complete. Do not leave more
than 25 printed sheets stacked on the tray.
Image on the TV monitor
The area within
the broken line is
stored in memory.
When printed on sticker-type paper, pictures
are printed slightly beyond the sticker borders.
If you want to switch between the input image and the stored image ...
press SOURCE. Each time you press the button, the displayed image alternates between the
input image and the stored image. This function is not available during printing.
If you store the wrong image or store an image incorrectly ...
press SOURCE to call up the INPUT display, then find the correct image and store it in
memory. The incorrect image will be deleted and the new image be stored.
FRAME STABILISER
With a “squeezed” video input signal, switching between ON/OFF of FRAME STABILISER is
not available. Enter the pause mode on the video unit, make sure that there is no noise or
fluctuation on the frame and store the scene in memory.
If you want to print multiple copies of the same scene ...
select the number of print copies on the PRINTER MENU screen. You can select up to 25
copies (page 20). When printing two or more copies, you can press the CANCEL button on
the remote control unit at any time to stop print operation after finishing the currently
printing page. “Remaining sheets: 5” appears on the monitor screen.
To print a “live” image using a camcorder as the source ...
in step
4
, instead of playing back the source tape, engage the camcorder’s Record mode.
Output tray
Print lamp