Filter
Top Products
EN 27
4
BEGIN SOURCE PLAYBACK
Fast-forward or rewind the source tape to find
the desired scene, then start playback a little
before the scene.
5
PRESS MEMORY WHEN THE
DESIRED IMAGE APPEARS
•The image is stored in memory. However, the
stored image is not shown and the screen
continues to display the input video.
•The next position to be stored in memory
appears in all white in the upper righthand
corner of the screen.
6
REPEAT STEP 5 FOR EACH IMAGE
YOU ARE GOING TO PRINT (UP TO
16) AND STORE THEM
•After 16 images have been stored in memory,
the MEMORY display appears.
• If you want to end memory storage before
16 images have been captured, press OK.
The MEMORY display appears, on which
empty positions are shown in white.
• Title Impose Print is not available.
7
PRESS PRINT
•The Print Lamp blinks, indicating that
printing has started.
• “Now printing!!” appears on screen during
printing.
• When the printed sheets are delivered to the
output tray and “Now printing!!” disappears,
printing is complete. Do not leave more than
25 printed sheets stacked on the tray.
Display of stored position
Input video display
To exit EDITING INDEX mode...
Press MODE after printing and the EDITING INDEX display disappears.
If you store a wrong image or store an image incorrectly...
It is not possible to correct a wrong image once it has been stored in memory. Press MODE
to release the EDITING INDEX mode and then perform steps 1 to 6 from the beginning
again.
FRAME STABILISER for unstable image correction...
Switching the FRAME STABILISER ON/OFF is not available in the EDITING INDEX mode.