Filter
Top Products
EN 9
LOADING THE PAPER TRAY
Printing side
Loading paper in the paper tray
Partition panel
A
Removing and Attaching the Paper
Tray
•Push the tray slightly to unlock the latch,
then pull it out.
•To attach, insert until you hear the paper
tray catch in place.
1. Adjust partition panel
A
according to the
paper size.
2. Press down the lever and insert the paper.
• Load the paper shiny side up, with the
side that has the wider area beyond the
perforations closest to partition panel
B
.
Load no more than 25 sheets.
3. Adjust partition panel
B
according to the
paper size.
After inserting the paper, push in
C
until it
clicks into place.
NOTES:
•
Fan the paper to separate the individual
sheets.
•
Be sure to thoroughly read the precautions
listed on the paper tray.
•
Place the printing paper shiny side up (the
side with no printing on it) in the paper tray.
A paper jam could result if the paper is
inserted with the wrong side facing up.
•
If a paper jam occurs, refer to page 12,
"Clearing a Paper Jam."
•
Remove the paper from the paper outlet. If
more than 25 sheets accumulate in the
paper outlet, a paper jam could result.
Perforations
Perforations
Partition
panel
B
Partition
panel
A
Lever
C