Filter
Top Products
56
M.CH
USB M. SCR
AGC AUTO
MEMORY TRANSFER
■ Memory \ VFO Transfers
This function transfers the contents of the current
memory channel to the currently selected VFO. A
Tone frequency stored in a memory channel is not
transferred to the VFO since the Tone is set via
Menu No. 57 (SUB.TONE) when in VFO mode.
In Memory Recall mode, press [M>VFO].
Note:
If a memory channel is recalled, then the recalled data is
changed but not saved to the memory channel, pressing
[M>VFO]
transfers the new data to the VFO.
This table illustrates how memory channel data
transfers to the VFOs and which VFOs are selected for
receive and transmit after the transfer.
9 MEMORY FEATURES
■ Temporary Frequency Changes
After recalling a memory channel, it is possible to
change the displayed frequency without altering the
frequency that is actually stored in that memory
channel. After changing the frequency, you could
then store the new frequency in a memory channel if
you wanted to save it for future use.
1 Set Menu No. 49 (CH.SHIFT) to ON.
2 Recall a memory channel.
3 Turn the Tuning control to select the frequency
that you want.
•You can change operating mode by pressing
[LSB/USB], or [CW/–R], or [FSK/–R], or
[FM/AM]. This is true whether Menu No. 49
(CH.SHIFT) is ON or OFF.
Note:
Memory channels can be tuned in this manner while
using the TF-SET function.
MEMORY CHANNEL SCROLL
Memory Scroll allows you to check memory channels
without changing your current receive frequency. Only
the display changes; the receiver doesn’t alter its
receive frequency. This function could be useful if, while
monitoring a frequency, you wanted to consult the
frequencies stored in your programmed memory
channels.
1 Press [M.IN].
• The memory channel that was last selected
appears. This is the same channel that would be
selected if [RX M.CH] were pressed.
2 Turn the M.CH/VFO.CH control, or press Mic [UP] or
[DWN], to step through the memory channels.
3 To exit Memory Scroll, press [CLR], or [SEND], or
Mic [PTT].
• The transceiver re-displays the memory channel
or VFO frequency that was selected before you
activated Memory Scroll. This is true even if you
scrolled through some memory channels.
•Another way to exit is to close your CW key while
the VOX function is ON.
Simplex channel
Simplex channel
Simplex channel
Simplex channel
Simplex channel
Split-frequency channel
Split-frequency channel
Split-frequency channel
Split-frequency channel
Split-frequency channel
M.CH
M.CH
M.CH
VFO
A
VFO
B
M.CH
M.CH
M.CH
VFO
A
VFO
B
VFO
A or B
VFO
B
VFO
A
VFO
A
VFO
B
VFO
A
VFO
B
VFO
A
VFO
A
VFO
B
VFO
A or B
VFO
A
VFO
B
VFO
B
VFO
A
VFO
B
VFO
A
VFO
B
VFO
B
VFO
A
Type of Memory Channel
Before
Pressing
[M>VFO]
After Pressing
[M>VFO]
RX TX RX TX
1
M.CH
VFO
A
VFO
B
M.CH
M.CH
M.CH
VFO
A
VFO
B
M.CH
M.CH
Memory channel contents are transferred to the last
receive VFO that was selected.
1
Simplex channels:
Split-frequency
channels:
Channel data
RX
data
TX
data