Kenwood TS-870S Microcassette Recorder User Manual


 
57
M.CH
CW
AGC AUTO
M.CH
FSK M. SCR
AGC AUTO
M.CH
USB
AGC AUTO
Note:
If a memory channel is recalled, then the recalled data is
changed but not saved to the memory channel, pressing
[M.IN]
in Step 5 transfers the new data to the destination
memory channel.
In the FM mode, when channel 99 is copied to another
memory channel (00 ~ 98), a Tone frequency of 88.5 Hz is
stored automatically in the destination channel.
ERASING MEMORY CHANNELS
This procedure erases all data from the selected
memory channel
1 Press [RX M.CH] to select Memory Recall mode.
2 Select the memory channel that contains the data
that you want to erase.
3 Press [CLR] for approximately two seconds.
•A beep sounds to confirm that the channel data is
erased.
Full Reset
Do a Full Reset if you want to erase all data in all
memory channels or if a Partial Reset {page 63}
does not correct a problem. Remember that a Full
Reset requires that you re-enter any memory
channel data again after the initialization if you want
to use those channels. A Full Reset also initializes
all electronic keyer settings to their default values.
Press [A=B]+[ ].
9 MEMORY FEATURES
Channel to Channel Transfers
1 Press [RX M.CH] to select Memory Recall mode.
2 Select the memory channel that contains the data
to be transferred.
3 Press [M.IN] to select Memory Scroll mode.
4 Select the destination memory channel.
5 Press [M.IN].
These tables illustrate how data is transferred
between memory channels.
RX frequency
RX mode
TX frequency
TX mode
Subtone
frequency
Channel lockout
OFF
Channel 00 ~ 98
RX frequency
RX mode
TX frequency
TX mode
Subtone
frequency
Channel lockout
OFF/ON
\
\
\
\
\
\
Channel 00 ~ 98
\
Channel 99
\
\
\
\
Channel 00 ~ 98
\
TX/RX
frequency
Start frequency
TX/RX mode
End frequency
Channel lockout
OFF
RX frequency
RX mode
TX frequency
TX mode
Subtone
frequency
Channel lockout
OFF/ON
Channel 00 ~ 98
\
\
\
Channel 99
\
TX/RX
frequency
TX mode
Channel lockout
OFF/ON
RX frequency
TX frequency
RX mode
TX mode
Subtone
frequency
Channel lockout
OFF