Kodak 6B6640 Printer User Manual


 
Calibrating the Printer
1-6 March 2001
Obtaining Densities
There are three methods for obtaining densities:
from a file
from a densitometer
from a centralized densitometer (NT only and if the Centralized Densitometer
application is installed on your network)
The contents of the calibration configuration file determine which method you use
(see Editing the Device Configuration on page 3-25).
Obtaining Densities from a File
If the configuration settings include obtaining the density data from a file, the
display shows the Waiting for Density File dialog box.
If the configuration settings do not include obtaining the density data from a file,
go to either:
Using the Densitometer to Read Densities on page 1-7
Obtaining Densities from the Centralized Densitometer (NT Only) on
page 1-8
NOTE: To create a density file, see Creating a Density File for Use with Calibration
on page 3-36.
1. Click OK to continue with the calibration process.
2. Go to Completing the Calibration on page 1-10.