Filter
Top Products
Calibrating the Printer
March 2001 1-9
The display shows the window for the Centralized Densitometer Application.
2. Highlight the device.
3. Click Measure (or select Operations->Measure) to measure the target
images.
4. At the densitometer, measure the densities (see “Using the Densitometer to
Read Densities” on page 1-7).
When the densities are measured, the status bar on the Centralized
Densitometer Application window shows “Ready.”
The density measurements are automatically sent to the LED printer’s host
computer.
Continue with “Completing the Calibration.”