Filter
Top Products
Introduction
Part No. 6B4389 June 1999 1-3
Overview of Installing and Configuring the N IC
To install and configure the NIC:
Step 6: Install the printing software.
No
Use server
print queues?
Yes
Step 5: Configure server (Novell, Windows NT)
Step 4: Configure the NIC if the default settings are unacceptable.
Use a Web-based interface, Telnet, Or the XAdmin utility.
Recommendation: Use the defaults until you can demonstrate successful
network printing. (TCP/IP minimally requires an appropriate IP address
that can be entered from the printer’s front control panel.)
Yes
No
Step 3: Install the NIC in the printer.
Requires Phillips or T10 torque
screwdriver and static strap.
Step 2: Gather necessary hardware and software components:
printing software (included on the CD that came with the printer),
NIC, and utilities diskette.
Step 1: Determine your network and printing environment.
NIC supports TCP/IP, Novell Netware, AppleTalk, and NetBEUI protocols.
Is the NIC installed in the
printer?