Filter
Top Products
Installing the Hardware
Part No. 6B4389 June 1999 2-3
2. Remove the four screws on the back of the 8660 printer.
3. Remove the back panel.
4. Attach the wrist portion of a static strip to your wrist. Attach the
other end of the strap to the metal frame of the 8660 printer.
CAUTION: Wear the antistatic strap during this
installation procedure so that you do generate
static electricity that can damage the
8660printer.
5. Remove the screws which hold the slot cover for the Network
Interface Card in place.
6. Remove the Network Interface Card from the antistatic bag.
Slot cover