Filter
Top Products
7 Maintenance
User Guide 45
Maintenance
The Kodak EasyShare All-in-One requires little maintenance. However, you should clean the glass and lid
backing to remove dust and fingerprints.
Fingerprints and other debris on the glass or lid backing could slow down performance and affect the
accuracy of scanning.
This section covers the Settings menu, printhead installation, printhead calibration, checking ink levels, and
changing ink cartridges.
General Care
IMPORTANT: Always disconnect the power before cleaning. Do not use harsh or abrasive cleaners or organic
solvents on the EasyShare AiO or any of its parts.
WARNING
Do not leave items on the scanner glass. The heat of the scanning lamp may cause them to
stick.
To clean, wipe the outside of the EasyShare AiO and LCD with a clean, dry cloth.
Keep the surrounding area vacuumed and litter-free.
Protect the EasyShare AiO from tobacco smoke, dust, sand, and liquid spills.
Avoid placing objects on the EasyShare AiO.
Keep the EasyShare AiO, accessories, and supplies away from direct sunlight and out of high-
temperature environments.
Do not allow chemicals, such as suntan lotion, to come into contact with the painted surface of the
EasyShare AiO.
If the EasyShare AiO has been subjected to inclement weather or you suspect water has gotten inside
the EasyShare AiO, turn it off and let it dry out. If this does not resolve the problem, contact customer
support (see Telephone Customer Support).
Service agreements are available in some countries. Contact a dealer of Kodak products for more
information.
The EasyShare AiO and the AC power adapter contain a small amount of lead in the circuit board.
Disposal of this material may be regulated due to environmental considerations.
For more disposal or recycling information, contact your local authorities. In the US, visit the Electronics
Industry Alliance Web site at www.eiae.org
.
Clean the Scanner Glass
To ensure that your copies and scans remain clear, keep the scanner glass and lid backing clean and dust
the exterior.
1 Turn off the EasyShare AiO and raise the lid.
2 Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive glass cleaner.