Filter
Top Products
User Guide 3
Product Overview
Number Name Description
3
Check Paper
Light
Flashes when:
• Out of Paper
• Paper Jam
• Rear Access Door/Duplexer Missing or Ajar
• Wrong Paper Size
4
Tagged Light
This green LED lights when a DPOF print file is found on the photo source
connected to 5100 AiO. It will remain on until the source has been
removed.
5
Photos Light On when Photos is selected by Photo Action button.
6
Proofsheet Light On when Proofsheet is selected by Photo Action button.
7
Transfer Light On when Transfer is selected by the Photo Action button.
8
Photo Action
Button
If the photo tray is not engaged, select either Transfer, or Proofsheet.
If the photo tray is engaged, selects either Transfer or Photos (4x6 print).
9
Quantity Display Displays how many copies will be produced (1-9).
10
Black Light Indicates copies will print in black and white.
11
+ Button
Increases the number of copies from 1 – 9.
12
Color Light Indicates copies will print in color.
13
– Button
Decreases the number of copies from 9 – 1.
14
Copy Color
Button
Selects between Color and Black copies. The default is Color.
15
Start Button Starts a copy, print, transfer, or scan operation.
16
Cancel Button Cancels a copy, print, transfer or scan operation.
17
Copy Print Size
Button
Selects between print sizes of 100% and Fill Page.
18
Fit to page Light Indicates the print size for Copy mode is Fill Page.
19
100% Light Indicates the print size for Copy mode is 100%.
20
Copy Button Press to enter Copy mode. Lit when in Copy mode.
21
Scan Button Press to enter Scan mode. Lit when in Scan mode.
22
Pictures Button Press to enter Print mode. Lit when Print mode.
23
PictBridge Light On when a PictBridge device is connected.
24
On/Off Light
Green when Starting Up, Ready, or in Standby mode.
Flashes red when in an error state.
Is not lit when in Sleep mode.
25
On/Off button
If the EasyShare AiO is currently Ready, pressing On causes it to enter
Standby mode (or Sleep mode, see Standby and Sleep Modes). If the
EasyShare AiO is currently in Standby mode, pressing On returns it to
Ready mode. If the EasyShare AiO is currently in Sleep mode, pressing On
initiates the Startup sequence (see Startup
). If the EasyShare AiO is
currently busy executing a job, pressing On cancels the current job as if the
Cancel button had been pressed. After the Cancel behavior sequence
completes, the EasyShare AiO enters Sleep mode.