Filter
Top Products
KODAK EKTAGRAPHIC III Slide Projector 9
Operation
Tray Place the loaded slide tray on the projector. Align the tray index bar with the
gate index. The tray will drop into position.
Removing the Tray
To remove the slide tray:
• press the select bar all the way down
• align the tray index bar with the gate
index.
You can then lift off the tray.
Raised Index Mark This feature allows you to
coordinate tray starting positions
for multiple-projector
presentations. For an 80-slide tray
in the zero position, the raised
index mark is at slot 20. If you
start with slide 6, it will align at
slot 26. For a 140-slide tray in the
zero position, the index mark is at
slot 35. So, if you start with
slide 12, it will align at slot 47.