Filter
Top Products
KODAK EKTAGRAPHIC III Slide Projector 13
Operation
Reading Light To illuminate a small area for reading, lift the reading light cover while the
projector lamp is on.
Standby Light
(Model E Plus only)
A glowing standby light indicates a
“ready” condition.
In a dissolve program, it indicates
that
• both projectors are receiving
power
• both power switches are set at
fan
• both projection lamps are
properly installed, not burned
out, and ready
• both standby lights are operational
• all thermal fuses are functional
Special-Application
Receptacle
The special-application receptacle allows additional external control and
programming capability. It provides 22.5 V low-voltage power isolated from
the main power line.
Use this receptacle for:
• automatic “return-to-zero” devices (models A and E Plus)
• a low-voltage power supply
• a dark shutter switch
The receptacle accepts 8-pin plugs and DIN-type plugs with 3 or 5 pins at
180˚. (See “Appendix A” for contact identification descriptions.)