Filter
Top Products
KODAK EKTAGRAPHIC III Slide Projector 3
Introduction
Take the time to read the instructions in this operating manual to become
familiar with your KODAK EKTAGRAPHIC III Slide Projector and how to
operate it properly.
Operation
Startup
Models III BR
and ABR Only
Important
Before you turn on your new KODAK EKTAGRAPHIC III BR or ABR Slide
Projector, it is critical to set the voltage selector to the proper setting. Use
the proper fuse for the voltage selection. See the fuse label on the back of the
projector.
The voltage selector on the KODAK EKTAGRAPHIC III BR or ABR Slide
Projector is located on the base of the projector. Using a small object, such as
a coin, you can set the voltage selector for the proper voltage (100, 115, 130,
220, 230, and 240 V).