Filter
Top Products
4 KODAK EKTAGRAPHIC III Slide Projector
Operation
EKTAGRAPHIC III BR and ABR Slide Projectors have a sensing capability
to automatically set the proper power cycle (50 or 60 Hz). This eliminates the
need to manually change the two-position switch included on models
manufactured before November 1996. These projectors are shipped with a
detachable power cord that is packaged separately (not wound on the Power
Cord Retainer).
A spare fuse is provided. The fuse is located in the small, pull-out storage door
below the Power Inlet. Simply pull the door with your finger. Remove the
spent fuse with a small object (e.g., pencil tip) by pushing the fuse up and
removing it from the receptacle. Press the spare fuse into the receptacle and
close the storage door.
Important
The EKTAGRAPHIC III BR and ABR Slide Projectors are supplied with a
3-wire grounding power cord to comply with UL122 (USA) and CSA222
(Canada) safety and electricalstandards. We urge you to provide a permanent,
properly installed 3-wire receptacle as the source of power for this projector.
For advice and assistance, call a licensed electrician or your local power
company.
When used outside the United States of America, please use a proper adapter
that ensures grounding and polarization.
Although the Models III BR and ABR are approved to the standards of UL
and CSA, they are not intended to meet approval in all countries worldwide.