Filter
Top Products
A-61517 October 2004 3-19
Enter the x and y offset which defines the upper left corner of the
zone relative to the upper left corner of the desired document. Enter
the length and width of the zone to be captured.
Original
Bi-tonal image Relative to Document
You can enter the desired values in the fields or use the arrow keys
to define the desired area. The Display window will show the
cropping area as you change the values.
Based on the Relative to Document cropping parameters the image
to be generated from this document would lie outside the document
area. Make sure the relative cropping offset, width, and length are
correct and that the document is being scanned is at least the same
size as the zone you defined.