Filter
Top Products
A-61517 October 2004 4-14
Page layout
The Page Layout area allows you to select paper size and viewing
orientation.
The default paper size is set when a scanner is first selected. You can
choose a different paper size using the drop-down list box. Use
Scanner’s Maximum to enable auto cropping.
The Page Layout selections also appear on the Scan Area dialog box. If
you make a change on the Scanner Settings dialog box, the same
selections will appear on the Scan Area dialog box and vice versa.
The Page Layout area allows you to select either Portrait or
Landscape for viewing orientation. This determines how the image data
will be stored and viewed.
• Portrait will display the image orientation in the shape of a
conventional portrait, where height is greater than width.
• Landscape will display the image orientation in the shape of a
conventional landscape painting, where width is greater than height.
Contrast % sets the image contrast by adjusting the difference
between black-and-white, thereby making an image sharper or softer.
Contrast is only available for binary images.
In a low-contrast setting, the difference between black-and-white is
small, so the image is softer. In a high-contrast setting, the difference
between black-and-white is large, so the image is clearer. Select a
contrast value from 1 to 100. The default is 50.
Contrast 1
Contrast 60
Contrast 100