Filter
Top Products
A-61517 October 2004 4-1
4 Using the ISIS Driver
Installation
The ISIS driver is included with the scanner. You can install the driver
from the CD.
1. Insert the CD into the drive.
2. Follow the instructions on each screen as prompted.
After installation of the driver is complete, install your application
software on the host PC.
After your application software is loaded and launched, use the ISIS
driver software to setup your scanner.
A sample ISIS driver application, called the Scan Validation Tool, is also
installed during this installation. This application can be used to validate
scanner functionality. The screen captures below (from the Scan
Validation Tool) document the ISIS driver graphical user interface (GUI)
which is one option when creating your own application. If you choose to
use programmatic controls, refer to the appropriate Pixel Translations,
Inc. documentation which documents ISIS functionality.
1. Select Start>Run or select Programs>Kodak>Document
Imaging>Scan Validation Tool. Enter the filename or choose
Browse to locate the ScanValidation.exe file.