Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using KODAK Drivers with Windows Applications — PC 9-13
Change the Magnification Adjustment
4. (Optional) Change the MAGNIFICATION ADJUSTMENT if desired by moving
its slider or typing an integer value from -10 to 10 in the text box to
the right of the slider. The illustrations below for a 6x7 image demon-
strate the operation of this adjustment. (The film has been removed
from the holder to emphasize the border in these illustrations.)
NOTES: If you change the magnification adjustment, the Scanner must
refocus. As prompted by the message that occurs, remove a film holder if
present and place the calibration mask into the Scanner as explained in an
earlier step of this section. Follow additional prompts as they appear to:
remove the calibration mask, replace the film holder (with your film in it),
and wait for focusing to complete.
The magnification adjustment for each film size is maintained from work
session to work session.