Kodak RFS 3570 Scanner User Manual


 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-4 Installation (Hardware & Software) — Macintosh Computer
2. Find the SCSI port, also called a SCSI connector, on the back of the
computer (not the back of the Scanner), and determine whether or not
a device (for example a disk drive) is attached. The figures in this
chapter are intended to illustrate a typical Macintosh computer.
SCSI Icon
SCSI Port
BACK OF MACINTOSH COMPUTER
3. Select the appropriate instructions from the two sets that follow,
according to whether or not other external SCSI devices are con-
nected.
A. Continue below at “If No External SCSI Devices Are Connected”
if no external SCSI devices are connected.
B. Or continue at “If External SCSI Devices Are Connected” later in
this chapter if external SCSI devices are connected.