Filter
Top Products
6
Advanced copy operations
6-18 bizhub 162/210
To make copies using an erase setting
1 Position the documents.
For details refer to “Loading the document” on page 4-10.
2 Press the [Erase] key.
The erase indicator lights up.
3 Press the [*] and [)] keys to select
LEFT, UPPER or FRAME to specify
the area that will be erased.
?
Do you know how large an area is
erased?
% The width of the erased area for
the LEFT, UPPER and FRAME
settings can be set between
5 mm and 20 mm, in 1 mm increments. The default setting is
10 mm.
% The width of the erased area for the LEFT, UPPER and FRAME set-
tings can be changed using the erase setting function. For details,
refer to “Specifying ERASE SETTING” on page 7-36.
4 Press the [Yes] key.
The main screen appears.
5 Specify the desired copy settings.
For details, refer to “Making a basic copy” on page 4-3.
6 Using the 10-key pad, enter the number of copies to be made.
7 Press the [Start] key.
This will start the copy cycle.