Filter
Top Products
7
Using the utility mode
7-30 bizhub 162/210
COPY SETTING 2 menu
No. Name Description
1 MIXED ORIGINAL This function can be used to set whether or not the mixed orig.
function is selected when the machine starts up or after the con-
trol panel is reset.
This function can be set if an optional document feeder is in-
stalled.
• Default setting: OFF.
2 COPY PRIORITY This function can be used to set whether the automatic paper or
automatic zoom ratio setting is selected when the machine starts
up or after the Control Panel is reset.
• Default setting: AP (auto paper selection).
3 OUTPUT PRIORITY This function can be used to specify if the selected finishing mode
is NON, SORT or GROUP when the machine is turned off or the
[Panel Reset] key is pressed.
This function can be set if an optional document feeder is in-
stalled.
• Default setting: NON.
4 4IN1 COPY ORDER This function can be used to select from the following for the page
order when the 4in1 Copy mode is selected.
• Default setting: PATTERN1.
5 CRISSCROSS
MODE
This function can be used to set whether or not copies are fed out
in a crisscross pattern when the crisscross output conditions are
met.
This function can be set if an optional shift tray is installed.
• Default setting: ON.
6 DUPLEX COPY This function is used to select whether or not double-sided print-
ing is used.
The optional duplex unit must be installed. (Option only for the
bizhub 210)
• Default setting: OFF.
12
34
13
24
PATTERN1
PATTERN2